| Customization: | Available |
|---|---|
| Overcharge Protection: | Yes |
| Ovediscahrge Protection: | Yes |
|
Still deciding? Get samples of US$ 29.8/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Mode | LWS-4S100A-900 |
| PCM Size | L165*W95*T15mm |
| battery series | 4S Available |
| working current | 100Available |
| Usage(Cell Type) | Li-ion battery packs (14.8V/cell) LiFePO4 battery packs (12.8V/cell) |
| Application | Ebike, Solar products, etc |
| Sample | available |
LWS-4S100A-900(4S100A) for LiFePo battery pack of 4 cells in series is a battery protection solution of LWS's, can support a load with very stable, in addition that the continuous current may be up to 100A .
1.Provides protection for 4 series LiFePo battery pack
2.rovides protections in charging and discharging
3.Processes the balance between cells smartly, the current of it can be set freely by external components.
4.Deals with over-current and short-circuit protection with circuit itself
5.Protect an electrical circuit from damage caused by over current/ over load or short circuit
6.Support RS485 protocol
7.Support bluetooth protocol
8.Support low temperature heating
Test item |
Description |
Criterion |
Voltage |
Charging voltage | DC:14.4V CC/CV |
| Balance voltage for single cell | 3.2±0.025Vc | |
Current |
Balance current for single cell | 50±20mA |
| Current consumption (sleeping) | ≤250uA | |
| Current consumption(working) | ≤10mA | |
| Maximal continuous charging current | ≤100A | |
| Maximal continuous discharging current | ≤100A | |
| Maximal discharging current (time) | None | |
Over charge Protection |
Over charge detection voltage for single cell | 3.75±0.025V |
| Over charge detection delay time | 4±1S | |
| Over charge release voltage for single cell | 3.5±0.05V | |
Over discharge protection |
Over discharge detection voltage for single cell | 2.3±0.05V |
| Over discharge detection delay time | 4±1S | |
| Over discharge release voltage for single cell | 2.5±0.10V | |
Over current protection |
Over discharge current protection 1 | 300±50A |
| Detection delay time 1 | 1000mS | |
| Over discharge current protection 2 | 400±50A | |
| Detection delay time 2 | 100mS | |
| Overcharge current protects current | 150±20A | |
| Detection delay time | 1S | |
Short circuit protection |
Short circuit protection current | / |
| Detection delay time | 50~800uS | |
| Protection condition | Exterior short circuit | |
| Release condition | Cut load,Auto recovery | |
Temperature |
MOSMOS temperature protection | / |
| Charge high temperature protection | 65±5ºC | |
| Charge low temperature protection | -2ºC | |
| Discharge high temperature protection | 75±5ºC | |
| Discharge low temperature protection | -20±5ºC/ | |
| Release condition | 60, The temperature drops to 60ºC, charge release |
|
| Operating temperature range | -20~+60ºC | |
| Storage temperature range | -20~+60ºC | |
Resistance |
The on-state resistance of the main circuit | ≤5mΩ |
| Break circuit protection | Disconnect the voltage sampling circuit to turn off the charge and discharge | Support |
| NTC Protection | Thermistor temperature protection | Support |
| Electronic switch | Electronic switch | Support |
| Reverse polarity protection | Nonsupport | |
low temperature heating |
In charging mode, start heating | <0ºC |
| Stop heating | >5ºC | |
| Supports maximum heater current | <=5A |
| Electric Switch, Temperature Switch, Passive Balance, Active Balance, 5V output, NTC,bluetooth UART/BT/RS485/CAN communication/LCD dispay and etc., if you need any above accessories, please must to contact our sales fisrt. All items could be customized to your requirements,if without any requests after order placed, we will produce as specification in details page. |
| Shenzhen Li-ion Battery Bodyguard Technology Co.,Ltd was founded in 2013. We provide Battery PCM &BMS for Lithium ion,LiFePo4,LTO battery pack and ODM & OEM services.Since established, we have designed more than 900 types of hardware PCM/BMS, and software BMS including HDQ/12C/SMBUS/ RS485/RS232 & Bluetooth and so on. Mainly covers battery assembly 1S-35S in series, working current up to 350A; the products arewidely used in light ,power tool, electric bicycle,medical equipment, EV application ....etc. Li-ion Battery Bodyguard Technology Co., Ltd has passed ISO 9001(2015) certification.We were also awarded High Technology Expertise (HNTE) in 2018. The spirit of "honesty, credibility first" business principle, fast delivery time, competitive price ,high-quality products & services have got us many customer's affirmation.And because of that, our products have been sold to not only Germany, France, the United States, Australia, India, South Korea, Japan but also other countries and regions. As a professional BMS designer and manufacturer, we are willing to support, help every client to open new markets and extend new business. Meet us, Meet reliablility, Meet our mutual development! |
FAQ
Q: How do I judge what material my battery is ?
A: Please take a look at the battery body.if the normal voltage of your battery shows as 3.2V,the battery will be LiFePo4.If the normal voltage of your battery shows as 3.6V or 3.7V, the battery will be Li-ion or Li-polymer battery. you can also ask battery manufacturer the material of battery.
Q: who are we?
A: We are based in Guangdong, China, start from 2013.
There are total about 40 employees in our company.
Q:How can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q:.what can you buy from us?
A:Battery Pack BMS,Lifepo4/Lithium Ion PCM,Protection Circuit Board,Print Circuit Board,
Lifepo4/Lithium Ion Battery Pack.
Q:. why should you buy from us not from other suppliers?
A:The company has advanced production equipment and comfortable office environment,
employees hundreds of people. The company Has a complete, scientific quality management system,
and the importance of quality and environmental philosophy.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union,Cash;
Language Spoken:English,Chinese
About your products, just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recommend the most suitable products for you.
){kind=link}