| Customization: | Available |
|---|---|
| Overcharge Protection: | Yes |
| Ovediscahrge Protection: | Yes |
|
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Mode | LWS-30S130A-363V1 |
| PCM Size | L215mm*W78mm*T8.5mm |
| battery series | 10S Available |
| working current | 20Available |
| Usage(Cell Type) | Li-ion battery packs (37V/cell) LiFePO4 battery packs (32V/cell) |
| Application | 18650 and polymer battery |
| Sample | available |
LWS-30S130A-363V1 for LiFePO4 battery pack of 30 cells in series is a battery protection solution of LWS's, can support a load with very stable, in addition that the continuous current may be up to 130A .
| status | Status description |
Sleep function |
When the battery is no abnormality, static 20S, BMS into the system sleep, reduce consumption, then charge and discharge MOS in the open state, charging or discharge can be activated to normal working condition. |
Over discharge power down function |
When the battery pack into the over-discharge state, and the minimum voltage is less than the over-discharge protection value, BMS will minimize power consumption, turn off the charge and discharge MOS tube, you need to charge to activate. |
| Charge condition | Charger must be standard charger can be charged |
| Assemble the parallel battery pack | Newly assembled parallel battery packs or reassembled parallel battery packs require a new assembly of parallel battery packs or reassembly of parallel battery packs charging firstly, then they can be used for discharge. |
| Display LED | The display is composed of two interfaces. The first interface shows the total voltage, current, maximum temperature and minimum temperature of the company LOGO and battery pack, and SOC. The second interface shows the battery voltage of each section of the battery pack. |
| Item | parameter | specification | Remarks |
| Single voltage acquisition parameters | Number of strings collected | 16S | |
| Single voltage acquisition error | ±10mV | 25ºC | |
| Single battery overcharge protection value |
Single battery over voltage protection value | 3700mV | Adjustable |
| Single battery over voltage protection delay value | 1S | Adjustable | |
| Single battery over voltage protection recovery value | 3550mV | Adjustable | |
| Single battery under voltage protection |
Single battery over voltage protection recovery value | 2200mV | Adjustable |
| Single battery under voltage protection delay value | 1S | Adjustable | |
| Single battery under voltage protection recovery value | 2500mV | Adjustable | |
Balance functions |
System balance working principle | Intelligent passive Balance | |
| Single voltage balance start threshold | 3200mV | ||
| Balance current | 60mA | Cell voltage | |
| Single voltage differential balance start threshold | 30mV | ||
| Single voltage differential balance off threshold | 15mV | ||
| Battery pack charge and discharge current sampling and protection functions |
Current sampling accuracy | ±5% | 25ºC |
| Sampling resistance value | ≤0.55mΩ | ||
| Battery charge over current protection value 1 | 50A | Level one over current protection | |
| Battery charge over current protection delay value 1 | 1S | ||
| Battery charge over current protection recovery delay value 1 | 3S | ||
| Battery discharge over current protection value 1 | 100A | Level one over current protection | |
| Battery discharge over current protection delay value 1 | 1S | ||
| Battery discharge over current protection recovery delay value 1 | 3S | ||
| Battery charge over current protection value 2 | |||
| Battery charge over current protection delay value 2 | |||
| Battery charge over current protection recovery delay value 2 | |||
| Battery discharge over current protection value 2 | 330A | second level over current protection | |
| Battery discharge over current protection delay value 2 | 40mS | ||
| Battery discharge over current protection recovery delay value 2 | 5S | ||
| Battery short circuit protection value 1 | 660A | According to the actual settings | |
| Battery short circuit protection delay value 1 | 100-500uS | According to the actual settings | |
| Battery pack short circuit protection recovery delay value 1 | after disconnecting circuit 5S | ||
| Battery short circuit protection value 2 | |||
| Battery short circuit protection delay value 2 | |||
| Battery short circuit protection recovery delay value 2 | |||
| Battery pack anti-charge protection | |||
| Battery total voltage acquisition and protection functions | Battery pack total voltage acquisition accuracy | ±0.5% | |
| Battery pack load voltage acquisition accuracy | ±0.5% | ||
| Battery pack over voltage protection | 58880mV | ||
| Battery pack over voltage protection delay value | 5S | ||
| Battery pack over voltage protection recovery value | 57600mV | ||
| Battery pack under voltage protection | 35200mV | ||
| Battery pack under voltage protection delay value | 5S | ||
| Battery pack under voltage protection recovery value | 40000mV | ||
| Battery SOC management | SOC theory estimation accuracy | ±10% | |
| SOC is too low alarm value | 10% | ||
| Power supply parameters | System power operating range | 40-60V | |
| Maximum charge voltage | 60V | ||
| Running state power consumption | <15mA | ||
| Sleep static power consumption | 500UA | ||
| Communication | ,RS485 | Support | |
| 0V precharge function | 0V precharge function | not support |
|
| Single set of working conditions | maximum continuous discharge current |
80A | |
| maximum continuous Charge current | 70A | ||
| Recommended for battery capacity | 80AH | Adjustable | |
| Appearance |
|
||
| Electric Switch, Temperature Switch, Passive Balance, Active Balance, 5V output, NTC,bluetooth UART/BT/RS485/CAN communication/LCD dispay and etc., if you need any above accessories, please must to contact our sales fisrt. All items could be customized to your requirements,if without any requests after order placed, we will produce as specification in details page. |
| Shenzhen Li-ion Battery Bodyguard Technology Co.,Ltd was founded in 2013. We provide Battery PCM &BMS for Lithium ion,LiFePo4,LTO battery pack and ODM & OEM services.Since established, we have designed more than 900 types of hardware PCM/BMS, and software BMS including HDQ/12C/SMBUS/ RS485/RS232 & Bluetooth and so on. Mainly covers battery assembly 1S-35S in series, working current up to 350A; the products arewidely used in light ,power tool, electric bicycle,medical equipment, EV application ....etc. Li-ion Battery Bodyguard Technology Co., Ltd has passed ISO 9001(2015) certification.We were also awarded High Technology Expertise (HNTE) in 2018. The spirit of "honesty, credibility first" business principle, fast delivery time, competitive price ,high-quality products & services have got us many customer's affirmation.And because of that, our products have been sold to not only Germany, France, the United States, Australia, India, South Korea, Japan but also other countries and regions. As a professional BMS designer and manufacturer, we are willing to support, help every client to open new markets and extend new business. Meet us, Meet reliablility, Meet our mutual development! |
FAQ
Q: How do I judge what material my battery is ?
A: Please take a look at the battery body.if the normal voltage of your battery shows as 3.2V,the battery will be LiFePo4.If the normal voltage of your battery shows as 3.6V or 3.7V, the battery will be Li-ion or Li-polymer battery. you can also ask battery manufacturer the material of battery.
Q: who are we?
A: We are based in Guangdong, China, start from 2013.
There are total about 40 employees in our company.
Q:How can we guarantee quality?
A: Always a pre-production sample before mass production;
Always final Inspection before shipment;
Q:.what can you buy from us?
A:Battery Pack BMS,Lifepo4/Lithium Ion PCM,Protection Circuit Board,Print Circuit Board,
Lifepo4/Lithium Ion Battery Pack.
Q:. why should you buy from us not from other suppliers?
A:The company has advanced production equipment and comfortable office environment,
employees hundreds of people. The company Has a complete, scientific quality management system,
and the importance of quality and environmental philosophy.
Q: what services can we provide?
A:Accepted Delivery Terms: FOB,EXW;
Accepted Payment Currency:USD,CNY;
Accepted Payment Type: T/T,PayPal,Western Union,Cash;
Language Spoken:English,Chinese
About your products, just tell us the relative voltage/ cells/ current A or equipment etc,we will help to recommend the most suitable products for you.
){kind=link}