| Customization: | Available |
|---|---|
| BMS Type: | 7s Li-ion/Lithium Ion Battery BMS |
| Charging Current: | 7A |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
About your products,just tell us the relative voltage/ cells/ current A or equipment etc,
We will help to recommend the most suitable products for you.
Li-ion Battery Pack Advantages:
| Cell | No. () |
Item () |
General Parameter () |
Remark () |
|
| 1 | Rated Capacity () |
Typical () |
2600mAh | 0.2C, 2.75V discharge | |
| Minimum () |
2550mAh | ||||
| 2 | Nominal Voltage () |
3.63V | Mean Operation Voltage () |
||
| 3 | Internal Impedance () |
≤30 m | Internal resistance measured at AC 1KHZ after 50% charge () |
||
| 4 | Dimension () |
Hight/:65.0+0.5mm | Initial Dimension () |
||
| Width/:18.2 +0.3mm | |||||
| 5 | Weight () |
≤ 48g | Approx | ||
| 6 | Standard charge () |
Constant Current 0.5C5A Constant Voltage4.2V 0.05C5A cut-off (: 0.5C5A : 4.2V :0.05C5A) |
Charge time : Approx3 H (:3 ) |
||
| 7 | Standard discharge () |
Constant current 0.2C5A end voltage2.75 V (:0.2C5A : 2.75V) |
|||
| 8 | Operating Temperature | Charge : 0 to 45ºC 0-45ºC Discharge: -20 to 60ºC -20-60ºC |
|||
| 9 | Storage Temperature | 1year : -20~25ºC(1*) 3months : -20~45ºC(1*) 1month : -20~60ºC(1*) |
|||
| Package | No. () |
Item () |
General Parameter () |
Remark () |
|
| 1 | Combination method () |
7S1P (71) |
|||
| 2 | Combination standard () |
Capacity difference()≤1% | current-maintaining ability: storage 28 days in 20+2ºC after full charged. |
||
| Resistance difference () ≤3 mΩ | |||||
| current-maintaining ability()≥95% | |||||
| 3 | Rated Capacity () |
Typical () |
2600 mAh | Standard discharge after Standard charge(package) (()) |
|
| Minimum () |
2550 mAh | ||||
| 4 | Nominal Voltage () |
25.9V | Mean Operation Voltage () |
||
| 5 | Voltage at end of Discharge () |
≤17.5V | Standard discharge () Discharge Cut-off Voltage () |
||
| 6 | Charging Voltage () |
29.4±0.05V | |||
| 7 | Internal Impedance () |
≤250mΩ | Internal resistance measured at AC 1KHZ after 50% charge () |
||
| 8 | Standard charge () |
Constant Current 0.5C5A Constant Voltage29.4V 0.05C5A cut-off (: 0.5C5A : 29.4V :0.05C5A) |
Charge time : Approx3 h (:3) |
||
| 9 | Standard discharge () |
Constant current 0.2C5A end voltage17.5V (: 0.2C5A : 17.5V) |
|||
| 10 | Max. Discharge Current () |
1C5A | 2600mA(ambient temperature 25ºC) | ||
| 11 | Max.Charge Current () |
1C5A | 2600mA(ambient temperature 25ºC) | ||
| Test item | Criterion | |
| Voltage | Charging voltage | DC:29.4V CC/CV |
| Balance voltage for single cell | / | |
| Current | Balance current for single cell | / |
| Current consumption () |
≤50μA | |
| Maximal continuous charging current | 6A | |
| Maximal continuous Discharging current | 6A | |
| Over charge Protection () |
Over charge detection voltage for single cell | 4.25V±0.025V |
| Over charge detection delay time | 0.5S-1.5S | |
| Over charge release voltage for single cell | 4.05V±0.05V | |
| Over discharge protection () |
Over discharge detection voltage for single cell | 2.50V±0.08V |
| Over discharge detection delay time | 0.5S-1.5S | |
| Over discharge release voltage for single cell | 3.0±0.10V | |
| Over current protection | Over current detection voltage | 200±25mv |
| Over current detection current | 20±5A | |
| Detection delay time | 50mS-150mS | |
| Release condition | Cut load,release to charge , |
|
| Short protection | Detection condition | Exterior short circuit |
| Detection delay time | 100-600us | |
| Release condition | Cut load,release to charge , |
|
| Resistance | Protection circuitry(MOSFET) (MOSFET) |
≤50mΩ |
| Temperature | Operating Temperature Range | -40~+85ºC |
| Storage Temperature Range | -40~+125ºC | |
Li-ion battery Application :
Q: How many Ampere protection circuit boards should choose?
A: It depends on your load power such as electric motor power please contact the sales or technical support before buying.
Q: What is the distinction between same port wiring and different port wiring?
A: The cathode of charger and load is different for different port wiring , the cathode of charger and load is same for same port wiring and the charging current is equal to the discharge current.
Q: What is the distinction between balance and unbalance function?
A: Equilibrium function is that high voltage cells will be discharged with resistor, waiting for the low voltage cells , to achieve the each cell voltage is consistent , to improve the battery performance for the whole group.
Q: Do you have Minimum Order Requirement (MOQ)?
A: No, We don't have MOQ, Different customer have different requirement ,We can provide various capacity and size is per your requirements,Also ODM / OEM is welcome.
Q: What is your term of payment?
A: PayPal, T/T, L/C,
Any further questions, Welcome to contact our sales person by sending inquiry .
Your satisfaction is our pleasure. Let's Join hands for mutual Benefits!
){kind=link}