| Customization: | Available |
|---|---|
| BMS Type: | 60V Li-ion/Lithium Ion/LiFePO4 Battery BMS |
| Charging Current: | 40A |
|
Still deciding? Get samples of US$ 50/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
About your products,just tell us the relative voltage/ cells/ current A or equipment etc,
We will help to recommend the most suitable products for you.
Product Advantages:
About the battery BMS/PCB/PCM
Function: Detect and protect the battery from over-charge, over-dicharge, over-current short-circuit ,temperature detecting protection and auotmatically voltage balance function.
Build with high end electronic components (High End IC and MOSFET ) ,simple structure design will let it have more stable quality working performance , Flexible application( it can be used for less series battery by leaving some connection pins at empty status ), full set of protection measures let it works well without any infulence from external unexpected accidents.| Shenzhen Li-ion Battery Bodyguard Technology Co.,LTD | |||
| PCM Specifications For 60V (16S) Li-ion Battery Packs | |||
| Model: LWS-16S40A-415(16S)Support Same Port & Different Port | |||
No. |
25ºC Project test ambient temperature below 25°C |
Criterion |
|
| 1 | Voltage | Charging voltage | DC:67.2V CC/CV(4.2V/1Cell) |
| 3 | Current | Current consumption | <60uA |
| Maximum continuous charging current |
≤40A | ||
Maximum continuous discharging current |
≤40A | ||
| 4 | Over current protection (Primary protection) |
Over charge detection current |
50A(adjustable) |
| Detection delay time |
10mS-20S(adjustable) | ||
Over discharge detection current |
120A(adjustable) | ||
| Detection delay time |
50mS-40S(adjustable) | ||
recovery condition |
Cut load | ||
| 5 | Over current protection (Secondary protection) |
Balance voltage for single cell |
3.2-4.3V±0.025Vadjustable |
Balance current for single cell |
≤85mA | ||
Over discharge detection current |
150A(adjustable) | ||
| Detection delay time |
10ms-20S(adjustable) | ||
| 6 | Over charging protection for single cell |
Over charge detection voltage for single cell |
3.6-4.5V±0.025V(adjustable) |
Over charge detection delay time |
0.1-40S±100mS(adjustable) | ||
Over charge recovery voltage |
3.3-4.5V±0.025V(adjustable) | ||
| Over charge detection delay time |
200ms±100mS(adjustable) | ||
| 7 | Over discharging protection for single cell |
Over discharge detection voltage for single cell |
2-3.1V±0.025V(adjustable) |
Over discharge detection delay time |
0.1-40s(adjustable) | ||
Over charge recovery voltage |
2-3.6V±0.025V(adjustable) | ||
| 11 | Short protection |
Detection condition | P+,P- Short circuit |
| Detection delay time | 0-960us | ||
| recovery condition | Cut load | ||
| 12 | Resistance | Protection circuitry(MOSFET) | ≤20mΩ |
| 13 | , Primary protection & Over temperature protection |
NTC Temperature detection NTC | NTC |
| Charging high temperature protection |
30ºC-85ºC±5ºC(adjustable) | ||
| Charging delay time | 2s±1S | ||
Charging over temperature recovery |
30ºC-85ºC±2ºC(adjustable) | ||
Charging low temperature protection |
-20ºC-10ºC±2ºC(adjustable) | ||
Charging low temperature protection recovery |
-20ºC-10ºC±2ºC(adjustable) | ||
Charging low temperature protection delay |
2s±1S | ||
Discharging high temperature protection |
45ºC-85ºC±2ºC | ||
| Discharging delay | 2s±1S | ||
| Discharging high temperature protection recovery |
40ºC-80ºC±2ºC | ||
| Discharging low temperature protection |
-40ºC-10ºC±2ºC(adjustable) | ||
Discharging low temperature protection recovery |
-40ºC-15ºC±2ºC(adjustable) | ||
| 15 | Temperature | Operating Temperature Range | -20~+85ºC |
| Storage Temperature Range | -20~+125ºC | ||
Q: How many Ampere protection circuit boards should choose?
A: It depends on your load power such as electric motor power please contact the sales or technical support before buying.
Q: What is the distinction between same port wiring and different port wiring?
A: The cathode of charger and load is different for different port wiring , the cathode of charger and load is same for same port wiring and the charging current is equal to the discharge current.
Q: What is the distinction between balance and unbalance function?
A: Equilibrium function is that high voltage cells will be discharged with resistor, waiting for the low voltage cells , to achieve the each cell voltage is consistent , to improve the battery performance for the whole group.
Q: Do you have Minimum Order Requirement (MOQ)?
A: No, We don't have MOQ, Different customer have different requirement ,We can provide various capacity and size is per your requirements,Also ODM / OEM is welcome.
Q: What is your term of payment?
A: PayPal, T/T, L/C,
Any further questions, Welcome to contact our sales person by sending inquiry .
Your satisfaction is our pleasure. Let's Join hands for mutual Benefits!
){kind=link}